|
Memorator R SemiPro
Kvaser Memorator R SemiPro is a small, yet advanced portable CAN data logger. The device can be configured in many different ways to achieve the most suitable and effective logging for any occasion. Connecting the logger to a PC provides direct access for configuring baud rates, trigger conditions and filters using the standalone Kvaser Memorator Tools. To get a rugged design the SD-disk is located inside the unit and soldered to the PCB to make sure it works error free even when exposed to vibration and shocks.
Kvaser Memorator R SemiPro can also be used as a powerful two channel real time CAN to USB interface - two products in one!
Major features of Kvaser Memorator
- One device for desktop and laptop.
- Functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device.
- Support for Kvaser Linx J1587.
- Quick and easy plug-and-play installation.
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
- CAN messages are time-stamped with 2 microseconds resolution.
- Large on-board RAM buffer for CAN messages.
- 100% compatible with applications written for Kvaser Leaf, LAPcan, PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib.
- Galvanic isolation to protect the hardware.
- Power from CAN bus or from the USB side.
- Built-in real time (calendar) clock with battery backup.
- Logger status is indicated with five externally visible LEDs.
- IP67 rated lightweight aluminium housing
|
Property
|
Value
|
|
The information herein is subject to change without notice.
|
|
|
Galvanic Isolation
|
Yes
|
|
Bitrate
|
20-1000 kbit/s
|
|
Silent mode
|
Yes
|
|
Error frame generation
|
Yes
|
|
Error frame detection
|
Yes
|
|
Weight
|
190 g
|
|
Timestamp resolution
|
2
|
|
On board buffer
|
Yes
|
|
Maximum message rate, send
|
20000
|
|
Maximum message rate, receive
|
20000
|
|
Sound
|
No
|
|
Clock synchronization
|
MagiSync
|
|
Dimensions (WxLxH)
|
30x200x20 mm (1.2x7.9x0.8in.)
|
|
Memorator Light HS>>> Key:[Memorator Light HS] 